Made my first CAN Bus daisy chain termination for the GTR 200B com radio.
Finished wiring the COM radio connector.
Terminated the antenna cables with BNC connectors for the transponder and com radio and a TNC connector for the GPS.
Made up the connector for the GMC 507 autopilot control. Pretty simple… Power, Ground and CAN bus.
Installed the com radio tray and the transponder and GPS trays that I had pre-wired. I routed and tied all the wires.
| Today’s Time (hours): | 8.0 |
| Finish Kit (hours): | 120.0 |
| Total Time (hours): | 850.0 |
Ron's RV-14A Build Log 