Assembled the aileron trim.
Assembled the aileron pushrods, torque tubes, and bell cranks.
Installed all the parts into the wings and aligned everything.
| Today’s Time (hours): | 7.0 |
| Wing Time (hours): | 256.0 |
| Total Time (hours): | 408.0 |
Drilled holes for and installed angle of attack sensor tubing. Also ran wires for pitot heat.
Drilled the rivet holes for all the aileron push tube ends and prepared all the parts for priming.
Primed all the remaining wing parts.
Installed the aileron and flap gap fairings.
Assembled the ADAHRS mounting bracket.
| Today’s Time (hours): | 7.0 |
| Wing Time (hours): | 249.0 |
| Total Time (hours): | 401.0 |
Ron's RV-14A Build Log 