Skip to content

Ron's RV-14A Build Log

Building and flying a Van's Aircraft RV-14A experimental airplane

  • Home
  • Build Log
    • Tools & Workshop
    • Empennage
      • Vertical Stabilizer (Section 6)
      • Rudder (Section 7)
      • Horizontal Stabilizer (Section 8)
      • Elevator Assembly (Section 9)
      • Aft Fuselage (Section 10)
      • Empennage Attach (Section 11)
      • Empennage Fairings (Section 12)
    • Wings
      • Main Spar (Section 13)
      • Wing Ribs (Section 14)
      • Rear Spar (Section 15)
      • Top Wing Skins (Section 16)
      • Outboard Leading Edge (Section 17)
      • Fuel Tank (Section 18)
      • Wing Systems Routing (Section 19)
      • Bottom Wing Skins (Section 20)
      • Flap (Section 21)
      • Aileron (Section 22)
      • Aileron Actuation (Section 23)
      • Wing Tip (Section 24)
    • Fuselage
      • Fwd Mid Fuse Bulkheads (Section 25)
      • Mid Fuse Lower Structure (Section 26)
      • Firewall (Section 27)
      • Fwd Fuse Lower Structure (Section 28)
      • Fwd Mid Fuse Side Structure (Section 29)
      • Aft Fuselage Attachment (Section 30)
      • Fuel System (section 31)
      • Baggage Area (Section 32)
      • Rudder & Brake Systems (Section 33)
      • Flap Actuation System (Section 34)
      • Upper Fwd Fuselage (Section 35)
      • Aileron & Elevator Systems (Section 36)
      • Roll Over Structure (Section 37)
    • Finish Kit
      • Canopy and Window (Section 38)
      • Seat Backs (Section 39)
      • Tricycle Landing Gear and Engine Mount (Section 40)
      • Wing Attachment (Section 41)
      • Miscellanea (Section 42)
      • Engine Installation (Section 43)
      • Spinner and Propeller (Section 44)
      • Cowling (Section 45)
      • Tricycle Gear Leg and Wheel Fairings (section 46)
    • Firewall Forward
      • Cowl Baffle (Section 47)
      • Exhaust System (Section 48)
      • Fuel and Oil System (Section 49)
      • Control Cables (Section 50)
      • Firewall Forward Miscellanea (Section 51)
    • Options and Miscellanea
      • Avionics, Wiring, and Electrical
      • ACK ELT (Section 53)
      • Flap Position Sensor (Section 54)
      • Common Fuselage Harness (Section 55)
      • Garmin Autopilot Servos (Section 56)
      • Autopilot Yaw Servos (Section 58)
    • Registration and Certification

Tag: aileron bell crank

Completed aileron actuation

Assembled the aileron trim.

img_2947

 

Assembled the aileron pushrods, torque tubes, and bell cranks.

img_2949
img_2950
img_2951
img_2952
img_2953

 

Installed all the parts into the wings and aligned everything.

img_2956
img_2955
img_2957
img_2958
img_2959
img_2960
img_2961

 

Today’s Time (hours): 7.0
Wing Time (hours): 256.0
Total Time (hours): 408.0

 

Posted on July 14, 2019 by Ron SlosbergPosted in Aileron Actuation (Section 23), Build Log, WingsTagged aileron bell crank, aileron push tubes, aileron torque tubes, aileron trim, drill, rivet, rivet gun, squeezer. 1 Comment

Archives

  • August 2020 (3)
  • July 2020 (3)
  • June 2020 (7)
  • May 2020 (8)
  • April 2020 (10)
  • March 2020 (6)
  • February 2020 (13)
  • January 2020 (20)
  • December 2019 (28)
  • November 2019 (23)
  • October 2019 (13)
  • September 2019 (17)
  • August 2019 (11)
  • July 2019 (13)
  • June 2019 (24)
  • May 2019 (16)
  • April 2019 (18)
  • March 2019 (14)
  • February 2019 (14)
  • January 2019 (26)
  • December 2018 (23)
  • November 2018 (17)
  • October 2018 (3)

Tags

3M F9460PC VHB tape Aircraft Spruce Avionics, Wiring, and Electrical back rivet bandsaw blind rivet bolts cleco Crimpers Dark Gray deburr deburring tool dimple double flush rivet DRDT-2 Dremel drill drill press epoxy resin fiberglass file fit Flamemaster Chem Seal CS-3204 flute fuel tank sealant Garmin hardware hinge Home Depot J channel machine countersink micro bubbles molex nut plates nuts oops P60G2 paint panel peel pick and inspect plexiglass pneumatic rivet puller practice projects primer R7K44 ribs rivet rivet gun rod end bearings Rustoleum Painters Touch sand sand paper Scotch Brite Scotch Brite Wheel scuff sem rattle can Sherwin-Williams skin skins snap bushing snips spar spray squeezer step drill stiffeners tools torque wrench trailing edge Van's Aircraft west system Wire Stripper wiring workshop
Create a website or blog at WordPress.com
  • Follow Following
    • Ron's RV-14A Build Log
    • Join 31 other followers
    • Already have a WordPress.com account? Log in now.
    • Ron's RV-14A Build Log
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar
 

Loading Comments...