Finished riveting the bottom left skins

Finished riveting the forward half of the outboard left skin.

Riveted the nut plates to the inboard bottom skin and the inspection ports.

Installed the pitot mast, pitot tube, and pitot heat control box.

Two of the crimp-on quick disconnect terminals on the pitot tube were not properly crimped by Garmin and pulled off when I went to connect them. Disappointing! Unfortunately I had already put in an Aircraft Spruce order this weekend. I’ll wait until I have more stuff to order and get some new connectors.

Reinstalled the aileron push tube and torqued the fasteners.

Reinstalled the flaps.