Peeled the vinyl from all the parts. Did the minor cutting and fabrication called out in the plans. Cleaned up and deburred all the edges with file, deburring tool, scotch brite wheel, and sandpaper. Scuffed everything with a scotch brite pad.
Assembled and final drilled the aileron hinges. The inboard hinges are from the service bulletin. I’m surprised they haven’t updated the plans yet. Had to follow the SB instructions.
Clamped the spar doublers to the spars and match drilled them.
Drilled out the aileron pushrod hole in the inboard doublers and cleaned them up with the Dremel.
Clecoed the right rear spar together with the wing assembly.
| Today’s Time (hours): | 4.5 |
| Wing Time (hours): | 59.0 |
| Total Time (hours): | 270.0 |
Ron's RV-14A Build Log 
They’ll never update those plans! It’s just the way they work =)
LikeLike