Final drilled #30 the spar, doublers, rib flanges, and aileron hinge attachments.
Machine countersunk the flange holes where they match up to the doublers.
Machine countersunk the doubler plates. Also drilled the attach hole to 11/32 after this photo was taken. I need to pick up a 3/8″ reamer to finish the attach holes in the fork and doubler once they’re matched up and riveted to the spar.
Dimpled all the #40 holes in both flanges of the rear spar.
Everything is ready to prime and assemble when I get back from Sun n Fun next week. Pretty happy with this weeks progress.
|Today’s Time (hours):||1.0|
|Wing Time (hours):||60.0|
|Total Time (hours):||271.0|