Finished Seat Backs (Section 39)

I bolted together the lower corners of the seat backs. I drilled holes in the top angles using the template provided by FlightLine interiors. I blind riveted the snaps to the angles using those holes. I attached the seat back cushions to the seat backs with the snaps and the velcro provided.

Love the way the seats came out.

I also repainted the aft canopy frame. I wasn’t happy with my first attempt. It was splotchy and had spots of pretty bad orange peel. I wet sanded it and reshot it. It still looked awful. So I ended up stripping it down using acetone and repainting the bare metal. It came out quite a bit better. I’m wondering if the problem is the P60G2 primer. I’m going to shoot the remaining interior parts over bare metal.