Fluted the outboard seat and baggage ribs to mach the curve of the bottom skin. Riveted nut plates to the seat ribs.
Bolted and riveted the seat ribs to the bulkhead assembly.
Riveted the seatbelt lugs and routing angles to the baggage ribs.
Riveted the aft bulkhead to the seat rib assembly. Drilled and riveted the doubler to the bulkhead. Fabricated and riveted together the idler bearing assembly and riveted to the bulkhead.
Clecoed the bottom skins together and match drilled some holes. Cut the landing gear leg openings in the forward skins. Machine countersunk the doublers and dimpled the skin stiffeners. Drilled the 9/16″ hole in the skin with a step drill. This hole will be used to mount the transponder antenna.
|Today’s Time (hours):||5.0|
|Fuselage Time (hours):||31.0|
|Total Time (hours):||485.5|