Finished riveting the skin to the ribs of the left outboard leading edge. Had to lie it flat and get Remy to buck the last three rows on the top side. Just couldn’t reach.
Riveted the landing light mounting bracket in place.
Riveted the J channel stiffener to the top of the skin.
Left outboard leading edge complete.
Clecoed the ribs into the right outboard leading edge skin and drilled the 3/8″ hole for the tie-down eye bolt.
Fabricated the spacers for the landing light brackets. Painted the spacers and mounting screws. Riveted the nut plates into the brackets and shot another coat of paint over the rivets. Assembled the landing lights into the brackets.
|Today’s Time (hours):||4.0|
|Wing Time (hours):||111.0|
|Total Time (hours):||322.0|