Wiped everything down with acetone and shot everything with P60G2 Primer.
Painted the outboard bays flat black so it looks decent when seen through the landing light lenses. Kinda wish vans provided some sort of reflector or housing.
Dimpled a lot of nut plates. Riveted them to the splice strips, the inspection plate doubler. and the landing light backing plates, and the landing light brackets.
Clecoed the inspection port doubler to the skin and riveted in place.
Clecoed the ribs to the left skin and drilled the tie-down hole.
Made it about half way through riveting the left leading edge before calling it a night.
| Today’s Time (hours): | 6.0 |
| Wing Time (hours): | 107.0 |
| Total Time (hours): | 318.0 |
Ron's RV-14A Build Log 