I got back from my work trip to Toronto this evening and my new Molex connectors and pins had arrived. So I was able to crimp on the last pin and push the pins into the connector. Then I installed it into the elevator and connected the pushrod to the trim tab horn with a clevis and cotter key.
You can also see where I safety wired the trim tab hinge pin in place. As soon as I get the rivets I ordered from Aircraft Spruce, I’ll be able to complete the elevators.
| Today’s Time (hours): | 0.5 |
| Empennage Time (hours): | 128.5 |
| Total Time (hours): | 128.5 |
Ron's RV-14A Build Log 