I assembled the fresh air vents by sealing the vents to the ducts with silicone adhesive and then bolting them together with the mounting bracket. I then glued these assemblies in place on the side skins with tank sealant.
Assembled the canopy release mechanism. Used the jig that came with the kit to align everything and drilled the tube for the AN3 bolt. Then put everything together.
Machine countersunk the doublers and top skin for AN426AD2 rivets using a #34 drill bit. These suckers are teeny tiny. Double flush riveted the doublers to the forward top skin with the squeezer.
Today’s Time (hours): | 2.0 |
Fuselage Time (hours): | 193.0 |
Total Time (hours): | 647.5 |