Fabricated the fuel lines from metal tube. Installed the AN fluid fittings and flared the ends. Bent the lines using a tubing bender according to the dimensions in the plans. The 1:1 drawings in the plans were super helpful.
I got the loctite called out in the instructions for the fuel selector and used it on the screws to attach the fittings to the valve body. Then I installed the valve into the fuselage along with the fuel lines.
| Today’s Time (hours): | 3.0 |
| Fuselage Time (hours): | 139.0 |
| Total Time (hours): | 593.5 |
Ron's RV-14A Build Log 