Jared came over and helped me rivet the bottom skins. Thanks again! I neglected to take any pictures. Imagine the picture below with rivets where all the clecos are. Had to remove and reinstall the landing gear brackets to get all the rivets in.
Installed the control column.
Temporarily clecoed the side skins in place.
Temporarily bolted the upper and lower longerons to the firewall assembly and match drilled the cowling attach hinges and the longerons.
|Today’s Time (hours):||7.0|
|Fuselage Time (hours):||101.0|
|Total Time (hours):||555.5|