After the mess of the fuel tanks, I took the time to clean up the shop, replace the paper on the bench tops, and vacuum the floor.
Fabricated the flap gap doublers. Dimpled the flap and aileron gap fairings. Peeled and scuffed the forward facing side of the fairings.
Clecoed the ADAHRS mount together and match drilled to the j-channel stiffener. Disassembled, dimpled, and prepped all the parts. Countersunk and fluted the retainers.
Clecoed the inboard bottom skins to the wing assemblies. Match drilled the nut plate holes to the inboard ribs. Final drilled and deburred all the #19 holes in all the bottom skins.
|Today’s Time (hours):||4.0|
|Wing Time (hours):||233.0|
|Total Time (hours):||385.0|