Built the cradles for the flaps. Traced a leading edge rib to make a template which I transferred to the plywood blanks. I used the bandsaw to cut out the cradles. I glued and screwed some 2×2 stock to the bottoms so I can clamp them to the bench.
Started work on the flap attach brackets. Laid out and drilled the holes in the flange of one of the left halves of the bracket. Then match drilled the other three and deburred everything. The right halves get drilled later in the process.
| Today’s Time (hours): | 2.0 |
| Wing Time (hours): | 146.0 |
| Total Time (hours): | 357.0 |
Ron's RV-14A Build Log 