Clecoed and final drilled the elevator horns to the inboard ribs and spars.
Cut the trim tab pushrod parts and the trim tab horn parts.
Deburred everything and got about half the parts scuffed and ready for primer. Next I’ll scuff the rest of the parts, peel and scuff the skins and prime everything.
My pint of fuel tank sealant arrived from Sky Geek today. I’ll use this to glue the foam ribs in place.
| Today’s Time (hours): | 3.0 |
| Empennage Time (hours): | 88.0 |
| Total Time (hours): | 88.0 |
Ron's RV-14A Build Log 