Picked, Inspected, and deburred all of the cowl parts.
Trimmed and deburred the cylinder baffle doublers and riveted to the cylinder baffles.
Installed nut plates and oil cooler flange and assembled aft baffles. Added strips of RTV to the mating surfaces.
Trimmed the air cleaner frame, added nut plates and fit to the inlet ramp. Assembled the left inlet ramp.
Attached the SCAT tube flange and screen for the heater air inlet to the right inlet ramp. Assembled the right inlet ramp. Added RTV strips to the mating surfaces of the inlet ramps.
|Today’s Time (hours):||8.0|
|Finish kit (hours):||285.0|
|Total Time (hours):||1019.0|