Installed Canopy Decks and Panel Frame

Laid a bead of tank sealant to fill the gap between the side skin, longeron, and canopy deck. Then I clecoed and riveted the canopy decks in place.

 

Riveted the wire supports to the bottoms of the panel standoffs.

 

Clecoed the panel in place. I couldn’t rivet it because I ran out of K1000-06 nut plates. Ordered from Spruce.

 

Today’s Time (hours):	2.0
Fuselage Time (hours):	191.0
Total Time (hours):	645.5