I ordered plexi bits and a zero flute countersink so that I can fabricate the landing light lenses. While I’m waiting for those to show up, I started on the tanks.
Fluted and straightened the tank ribs yesterday. Final drilled all the #40 and #30 holes in all the ribs tonight.
Located and drilled the 3/4″ hole specified in the plans.
Match drilled the rivet holes from the finger strainer flange in the inboard ribs.
Dimpled all the holes in the top and bottom flanges of all the ribs.
| Today’s Time (hours): | 2.0 |
| Wing Time (hours): | 125.0 |
| Total Time (hours): | 336.0 |
Ron's RV-14A Build Log 