Countersunk spar flanges and Stringers and dimpled skins

Machine countersunk the flanges of both spars.

Used the blunted soldering iron to remove the blue plastic from the rivet lines. Then used a file and sand paper to clean up the edges. They were pretty rough.

Used the trusty DRDT-2 to dimple the skins. Good upper body workout. Lots of holes!

Tada…

Ribs, stringers, and skins all ready for scuff and prime.

Today’s Time (hours):	3.0
Empennage Time (hours):	64.0
Total Time (hours):	64.0