Started the wing build

Screen Shot 2019-05-27 at 10.10.58 AM

Cut the J channel to the specified lengths with the Dremel tool and a cutoff wheel.

img_2196

Clamped the J channel to flange leaving it 1/16″ proud of the flange.

img_2197

Drilled and clecoed the J channel.

img_2198img_2199

Flipped the lower J channel to the upper flange to finish the holes where the nut plates were on the lower flange. I marked the J channel and set aside for later when the skins go on.

Today’s Time (hours): 2.0
Wing Time (hours): 12.0
Total Time (hours): 223.0